Hydraulic Bump Stops

Hydraulic Bump Stops

From: $0.00

Carli Hydro Bumps combine with our 3″ Lift Systems to provide an active bump zone and secondary damping phase within your suspension stroke before bottoming the suspension. These are a great idea for anyone piloting unknown terrain as it only takes one unseen obstacle to cause severe damage in an 8,000lb. pickup.

Front Bump Stops – We Offer 3″ And 6″ Hydro-Bump Kits

Rear Bump Stops – 1″-2″ Rear lift ONLY. Not recommended to run with bypass shocks.


Description

This is the FIRST hydraulic bump stop on the market for a Dodge Ram. Carli’s bump stop kits do not reduce wheel travel. Only the final 2.5 of travel will utilize the bump stops. The bump stops act as a secondary suspension system. This system was designed to protect your truck from those unforeseen hits when pushing the limits of the suspension. All of the energy used to compress the bump stop is dissipated as heat thus preventing the suspension from bottoming out , leaving everything still in place on your dash. Also, the rebound of the bump stop is designed to extend at a slower rate which will keep from forcing the axle back up, which would cause the suspension to bounce back. By slowing down the last couple of inches of compression travel, you reduce the amount of stored energy that needs to be controlled on the rebound side. This will help maintain control of the vehicle when off-roading at speed.

Additional information

Model

,

Engine

,

Product Instructions for CS-DHYDRO

Instructions are not available at this time.

WARNING:

Cancer and Reproductive Harm www.P65Warnings.ca.gov.