• SKU: CS-DFSP-94 - 2" rear lift maintains slight rear-hight stance with Carli 3" Systems - Softens initial spring rate at ride height - Eliminates Factory Block; Minimizes Axle Wrap/Wheel Hop - Reduces payload to "light" 3/4-ton capacity - Capable of 15" of suspension travel with factory shackle - REQUIRES BUT DOES NOT INCLUDE - 5" Bump Stop Drop Bracket (Or Timbren PN: DR1525H4)
  • The track bar is the most important link under the front end of a straight axle, heavy-duty truck. It's both a suspension and steering component and any deflection in the factory bar or wear in the bushings are immediately felt by the driver in the form of excessive steering input, floating front end, wandering, and last but certainly not least, the dreaded death wobble. Exacerbate the bar's susceptibility to the above by lifting the truck and increasing the load while pulling the axle off-center and so completes the recipe for disaster. This adjustable track bar is a must for any Dodge 2500/3500 4x4 with an aftermarket lift or suffering from wandering steering. The track bar will center the axle side to side and ensure proper suspension geometry while providing a tighter front end feel by eliminating the sloppy O.E.M rubber bushings. Read the full description below for a complete profile of this product.   NOTE: Does NOT fit 2013+ trucks with factory radius arms. ONLY fits trucks from 2003-2013 that have factory control arms. If you truck has factory radius arms, you will need the CS-DATB-14 instead.
  • Warranty Registration - Register Warranty Here

    https://youtu.be/l5w68ihPFhw
  • Correct the geometry of your Leveled Ram while improving articulation, strength and serviceability. Bulletproof Billet construction pairs to in-house machined 17-4 Stainless, dampened, spherical joints to ensure your can rely on these arms for the long-haul!
  • Correct the geometry of your Leveled Ram while improving articulation, strength and serviceability. Bulletproof Billet construction pairs to in-house machined 17-4 Stainless, dampened, spherical joints to ensure your can rely on these arms for the long-haul!
  • SKU:  CS-RAM15UCA-09 - Boxed Steel Construction with Powder Coat Finish - Knurled, Anodized Aluminum Uniball Cab - Geometry Corrected for Leveled Vehicles - Serviceable Bushings at the Frame - 1” FK Uniball at the Knuckle with 17-4 Stainless Steel Uniball Pin - Fitment: 2009+ Ram 1500 4x4
  • SKU: CS-DD30-14-COILRETAINER - Provides Unrivaled Support for Coil Springs - Weld-in Installation - Machined, Mild-Steel Construction - A Necessity with 3.0" Shocks - Fitment: 2014+ Ram 2500 4x4 - Fitment: 2013+ Ram 3500 4x4
  • - Shot peened and pre-set - Guaranteed under the harshest conditions - Improved Ride and Handling Characteristics - Black Powder Coated
  • - 3" or 6" inches of lift - Shot peened and pre-set - Guaranteed under the harshest conditions - Improved Ride and Handling Characteristics - Guaranteed under the harshest conditions - Black Powder Coated
  • SKU: CS-RAM15C20SPKG-19 - Carli Custom Tuning - Fox Performance 2.0" Coilover Front IFP Shocks - Fox Performance 2.0" IFP Rear Shocks - Fitment - 2019+ Ram 1500 4x4, Hemi & EcoDiesel
  • The Commuter 2.0″ Shock Package boasts 2.0″, IFP Fox Shocks designed and tuned in-house for the customer looking for on-road and off-road performance improvement. Customers can expect a softer ride with more control and bottom-out resistance than stock This shock package CANNOT be run without Carli's rear setup. The rear shocks are far too long to run with factory coils springs - customers attempting this will risk their factory rear coil springs falling out of the truck.
  • Commuter System

    From: $2,050.00
    The Commuter 2.0″ System boasts 2.0″, IFP Fox Shocks. Designed and tuned in house for the customer looking for on-road and off-road performance improvement. Customers can expect a softer ride with more control and bottom-out resistance than stock
    Diesel Front Lift Hemi Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2" 2.5" 1" 8" 12" 2.0" 35" x 12.5

    NOTE: The above figures will deviate if the truck is equipped with Multi-Function Tailgate or Ram Box options! Prior to purchasing, we recommend reading the REBEL Article if your truck is equipped any or all of these options.

  • Commuter System

    From: $2,140.00
    The Commuter 2.0" System boasts 2.0", IFP Fox Shocks. Designed and tuned in house for the customer looking for on-road and off-road performance improvement. Customers can expect a softer ride with more control and bottom-out resistance than stock
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2" 3/4" 8" 13" 2.0" 34"
  • Correct the geometry of your Leveled Ram while improving articulation, strength and serviceability. Bulletproof construction pairs to in-house machined 17-4 Stainless, dampened, spherical joints to ensure your can rely on these arms for the long-haul!
  • Machined out of 17-4 Stainless Steel FK Bearing, Chromoly Rod-End.
  • Machined out of 17-4 Stainless Steel FK Bearing, Chromoly Rod-End.
  • Correct the geometry of your Leveled Ram while improving articulation, strength and serviceability. Bulletproof construction pairs to in-house machined 17-4 Stainless, dampened, spherical joints to ensure your can rely on these arms for the long-haul!
  • - Tightens Steering and Extended Service Life - Massive Durability Upgrade from Factory Components - Fully Rebuildable - More Precise Steering - Extends Life of the Vehicle Components
  • SKU: CS-DFEU-1419  - CS-DLMSS-14 - Stainless Low Mount Stabilizer - CS-DBJP-14 - Ball Joint Package - CS-DATB-1419 - Adjustable Track Bar - Fitment: 2014+ Ram 2500, 4x4 - Fitment: 2013+ Ram 3500, 4x4
  • SKU: CS-DFEU-T - For T-Style Steering ONLY - CS-DLMSS-T - Stainless Low Mount Stabilizer - CS-DBJP-03 - Ball Joint Package - CS-DATB-03 - Adjustable Track Bar - Fitment: 2003-13 Ram 2500, 4x4 - Fitment: 2003-12 Ram 3500, 4x4
  • Leveling System

    From: $2,235.00
    2.5″ front lift that delivers 50% more suspension travel than the stock Ram. Blueprinted coils paired with extended travel shocks increase control and comfort without breaking the bank.
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2.5" 1" 9" 9" 2.0" 35" x 12.5"
    Compatible with Factory Rear Air Suspension ONLY
     
    Lead Time Update - October 8th, 2021:
    These custom prints were signed off by Carli early 2020. Fox's custom shock program has delayed this to the point we cannot provide our customers an ETA at this time. They gave us "a few months" when this began; it's turned into 1.5 years and we're still unable to order the shocks. Once the shocks are ordered, we're anticipating 3-6 month production times. Once we receive word they're ready to order, we will change this status. We're sorry to have jumped the gun on releasing these systems; no one foresaw the unprecedented delays we've experienced.
  • Leveling System

    From: $2,235.00
    2.5" front lift that delivers 50% more front suspension travel than the stock Ram. Blueprinted coils paired with extended travel shocks increase control and comfort without breaking the bank.
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2.5" 1" 9" 9" 2.0" 35" x 12.5"
    Compatible with Factory Rear Air Suspension ONLY
     
    Lead Time Update - October 8th, 2021:
    These custom prints were signed off by Carli early 2020. Fox's custom shock program has delayed this to the point we cannot provide our customers an ETA at this time. They gave us "a few months" when this began; it's turned into 1.5 years and we're still unable to order the shocks. Once the shocks are ordered, we're anticipating 3-6 month production times. Once we receive word they're ready to order, we will change this status. We're sorry to have jumped the gun on releasing these systems; no one foresaw the unprecedented delays we've experienced.
  • Leveling System

    From: $1,195.00
    3" front lift that delivers 50% more suspension travel than the stock Ram. Blueprinted coils paired with extended travel shocks increase control and comfort without breaking the bank.
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2.5" 0" 8.3" 11" 2.0" 35" x 12.5"

    This system is tuned for the 3500s equipped with rear leaf springs. It will install on the 3500  trucks equipped with the factory auto-leveling air assist but the tuning is NOT refined to the platform. We recommend you measure the truck as it often takes less than 2.5" of front lift to level the Air-Assist Rams.

  • Leveling System

    From: $1,385.00
    2.5" front lift that delivers 50% more suspension travel than the stock Ram. Blueprinted coils paired with extended travel shocks increase control and comfort without breaking the bank.
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2.5" 1" 8.3" 11" 2.0" 35" x 12.5"

    This system is NOT compatible with the auto-level, air-assist Rams. We only manufacture one system for the Air Assist 3500, it can be viewed HERE.

  • SKU: CS-DLSK315 - 15" Limit Strap kit for 3" Front Suspension Systems on 2003-2013 Ram trucks.
  • SKU: CS-DLSK9415 - 15" Limit Strap kit for 3" Front Suspension Systems on 1994-2002 trucks. - Includes 2 Weld on Tabs for mounting
  • SKU: CS-DLSK620 - 20" Limit Strap kit for 6" Front Suspension Systems on 2003-2013 Ram trucks.
  • SKU: CS-DLA3-03 - 50% Longer than the Factory Control Arms - Massive Ride quality Increase - Linear travel stroke, capable of 14+ inches of front travel - 3/16" clam-shell construction with full-length internal structure - Serviceable 17-4 Stainless Spherical Bearing ends, Friction Free, Zero Bind - Longer, Flatter link provides more linear travel and increased ride quality - Fitment: 2003-09 Ram 2500/3500 4x4
  • SKU: CS-DLA3-10 - 50% Longer than the Factory Control Arms - Massive Ride quality Increase - Linear travel stroke, capable of 14+ inches of front travel - 3/16" clam-shell construction with full-length internal structure - Serviceable 17-4 Stainless Spherical Bearing ends, Friction Free, Zero Bind - Longer, Flatter link provides more linear travel and increased ride quality - Fitment: 2010-13 Ram 2500 4x4 - Fitment: 2010-12 Ram 3500 4x4
  • SKU: CS-DLSM-14-F - Massive Strength Improvement vs. Factory Mounts - Weld-in Installation - Boxed, 1/4" Steel Construction - A Necessity with 3.0" Shocks - Fitment: 2014+ Ram 2500 4x4 - Fitment: 2013+ Ram 3500 4x4
  • SKU: CS-DMRC-03-H - 2.75"-3" Lift Height Depending on Cab Configuration - Multi-Rate - Shot peened, pre-set & Powder Coated - Fitment: 2003-2012 Ram 3500 4x4 Hemi - Fitment: 2003-2013 Ram 2500 4x4 Hemi - Fitment: 1994-2002 Ram 2500/3500 4x4 Diesel
  • SKU: CS-RAM15MRC-09-R - Provide 1/4"-1/2" Rear Lift - Progressive Rate - Fitment: 2009-18 Ram 1500 4x4
  • SKU: CS-RAM15MRC-09-R-HD - Provide 1/4"-1/2" Rear Lift - Requires 500lbs Constant Load! - Progressive Rate - Fitment: 2009-18 Ram 1500 4x4
  • SKU: AS-RAM15PERF25SPKG-19 - Carli Custom Pistons and Tuning - F&R King 2.5" Remote Reservoir Shocks - 17-4 Stainless Shock Shafts - Short Reservoir Mounts - Requires Upper Control Arms & Brake Lines - Fitment - 2019+ Ram 1500 4x4, Hemi & EcoDiesel
  • The Performance 2.5" Shock Package boasts 2.5", Remote Reservoir King Shocks. Designed and tuned in house for the customer looking for substantial on-road and off-road performance improvement. Customers can expect a slightly more firm ride with substantially more control and bottom-out resistance than the Commuter. This shock package CANNOT be run without Carli's rear setup. The rear shocks are far too long to run with factory coils springs - customers attempting this will risk their factory rear coil springs falling out of the truck.
  • Designed and tuned for the ultimate, bolt-on, dual purpose rig, the Performance 2.5" King custom shock project tames anything the road, freeway or dirt trails have to offer.
    Diesel Front Lift Hemi Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2" 2.5" 1" 9" 12" 2.5" 35" x 12.5

    NOTE: The above figures will deviate if the truck is equipped with Multi-Function Tailgate or Ram Box options! Prior to purchasing, we recommend reading the REBEL Article if your truck is equipped any or all of these options.

  • Performance System

    From: $4,275.00
    Designed and tuned for the ultimate, bolt-on, dual purpose rig, the Performance 2.5" King custom shock project tames anything the road, freeway or dirt trails have to offer.
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2" 3/4" 9" 13" 2.5" 34"
  • Pintop Leveling System

    From: $3,830.00
    2.5″ front, 1" Rear lift designed for the customer who refuses to keep the rubber on the tarmac and has an eye for quality and appreciation for bang-for-their-buck.
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2.5" 0" 8.3" 11" 2.0" 35" x 12.5"

    This system is NOT compatible with the auto-level, air-assist Rams. We only manufacture one system for the Air Assist 3500, it can be viewed HERE.

  • Pintop Leveling System

    From: $4,240.00
    2.5″ front lift designed for the customer who refuses to keep the rubber on the tarmac and has an eye for quality and appreciation for bang-for-their-buck.
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2.5" 1" 9" 9" 2.5" 35" x 12.5"
    Compatible with Factory Rear Air Suspension ONLY
  • Pintop Leveling System

    From: $4,240.00
    2.5″ front lift designed for the customer who refuses to keep the rubber on the tarmac and has an eye for quality and appreciation for bang-for-their-buck.
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2.5" 1" 9" 9" 2.5" 35" x 12.5"
    Compatible with Factory Rear Air Suspension ONLY
  • Pintop Leveling System

    From: $3,640.00
    2.5″ front lift designed for the customer who refuses to keep the rubber on the tarmac and has an eye for quality and appreciation for bang-for-their-buck.
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    2.5" 0" 8.3" 11" 2.5" 35" x 12.5"

    This system is NOT compatible with the auto-level, air-assist Rams.

  • By nature, the Pintop kit boasts 2.5", Remote Reservoir King Shocks. Designed and tuned in house for the customer looking for substantial on-road and off-road performance improvement. Customers can expect a softer ride with more control and bottom-out resistance than the stock suspension.
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    3.25" 1" 9.6" 11" 2.5" 37" x 12.5"
  • By nature, the Pintop kit boasts 2.5", Remote Reservoir King Shocks. Designed and tuned in house for the customer looking for substantial on-road and off-road performance improvement. Customers can expect a softer ride with more control and bottom-out resistance than the stock suspension.
    Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
    3.25" - 3.5" 2" 9.6" 11" 2.5" 37" x 12.5"
  • SKU: CS-DPAP-94 - Replaces lower overload spring - More predictability and Spring Progression Keeps Tires Planted - 1" lift matches to our 3" front systems - Includes U-Bolts and Center Pins - Fitment: 1994-02 Ram 2500/3500 4x4, Diesel
  • These full-length progressive spring packs are built by Deaver Spring Mfg specifically for Carli Suspension. These springs were designed as a two-stage spring pack, enabling the truck to still have an admirable weight capacity while offering smooth and comfortable street driving performance. Choose between the Full Progressive Leaf Spring Pack to smooth our the rear ride of your 3" and 6" lifted, Diesel and Hemi equipped Rams.
  • SKU: CS-DMRC-03-D - 2.75"-3" Lift Height Depending on Cab Configuration - Multi-Rate - Shot peened, pre-set & Powder Coated - Fitment: 2003-09 Ram 2500/3500 4x4, Diesel
  • SKU: CS-RAM15MRC-19-R - Provide 3/4"-1" Rear Lift - Progressive Rate - Fitment: 2019+ Ram 1500 4x4 - NON Rebel, Multi-Function Tailgate, or Rambox
  • SKU: CS-RAM15MRC-RBL-19-R-HD - Fitment: 2019+ Ram 1500 REBEL - 1" Rear Lift with constant 500LBS in Bed and NO Rambox of MFT - 1" Rear Lift with Multi-Function Tailgate & Rambox (BOTH) OR - Fitment: 2019+ Ram 1500 4x4 (Non Rebel) - Not yet test BUT, should sit level with 700-800lbs constant load (at your risk until tested, in-house)
  • SKU: CS-RAM15MRC-RBL-19-R - Provide 1" Rear Lift - Progressive Rate - Fitment: 2019+ Ram 1500 REBEL - NON Multi-Function Tailgate or Rambox
  • SKU: CS-RAM15PRBDROP - Minimize Rear "Wag" From Track Bar During Extended Travel - Fitment: 2009-18 Ram 1500 4x4

Title

Go to Top